RegO® NH3 Field Topics
In its continuing quest for safety, RegO® publishes a series of Field Topics that provide useful information to LP-Gas & Anhydrous Ammonia dealers concerning the use and misuse of RegO Products. In addition, RegO publishes Warning Bulletins which cover many hazards in more detail. These warning Bulletins can be found in the RegO Products L-500 and L-102 Catalogs. Field Topics and Warning Bulletins are not intended to conflict with federal, state, or local ordinances and regulations. These should be observed at all times.
For more information refer to NFPA 58 – Liquefied Petroleum Gas Code, NFPA 54 – National Fuel Gas Code, National Propane Gas Association Safety Handbook, RegO Products LP-Gas Service Manual, RegO L-500 and L-102 Catalogs, ANSI K61.1 – Safety Requirements for Storage and Handling of Anhydrous Ammonia, Local Codes, and Ordinances.
- RegO Multibonnet® Assemblies
- LP-Gas Regulator Installation & Service Tips
- Minimum Required Rate of Discharge for LP-Gas Pressure Relief Valves Used with ASME Containers
- Anhydrous Ammonia Basics
- Liquid Flow Conversion
- LP-Gas Regulator Manifolds
- 3121 Unloading Adapter and L7579 Filler Valve
- Regulator Vents
- Regulator Vents Canada
- Chek-Lok® Valves
- Regulator Freeze-ups
- Identifying Relief Valve Manifolds
- Filling with a Multipurpose Valve
- Hose End Valves (A7797A and A7793A)
- Regulator Date Codes
- Identifying Regulator Model
- Multiport® Pressure Relief Valve Manifold Assemblies Suggested Maintenance Guide
- Protective Caps for Pressure Relief Valves
- Thermal Protection on Internal & Emergency Shut-off Valves
- Regulator Listed BTU Capacity & Performance
- Emergency Shut-off Valve Installation
- Presto-Tap® for Leak Check Purposes
- Regulator Vent Positions
- Pneumatic Actuators for Internal & Emergency Shut-off Valves
- Sizing Propane Piping Systems
- Regulator Lockup Troubleshooting
- LP-Gas Regulator Storage & Reuse
- Globe & Angle Valve Installation & Operation
- LP-Gas Tank Vapor Manifolds
- RegO® LP-Gas Regulator Storage and Reuse Suggested Guide
- Determining Propane Vapor Capacity
- Alternative Pressure Setting on Multiport Relief Valve Manifolds
- A3187S & A3197S Installation
- 1 ¾” ACME Double-Check Filler Valves